Stainless Steel recycling · Los Angeles Area
We buy 304 Stainless Steel
304 is the most common stainless, and it pays by the pound as long as it stays out of the carbon steel pile. We buy it from manufacturers, fabricators, and food-service shops across Southern California, with scheduled pickups sized to your volume. Graded honestly, under or over four feet.
This is an estimate. Prices move with the market. Contact us to confirm.
How to prep your 304 Stainless Steel
Keep it out of carbon steel. Sort 304 into its own pile away from carbon steel, since stainless pays by the pound and carbon by the ton.
Magnet-check for carbon steel. Run a magnet over the load and pull anything that grabs hard, since strongly magnetic pieces are likely carbon steel, not 304.
Separate the higher grades. Set aside 316 and other high grades where you can identify them, since mixing them into 304 pays them at the lower rate.
Cut oversized pieces down. Size lengths to under four feet where practical, since prepared 304 grades above pieces that still need cutting.
Pull off steel attachments. Remove carbon-steel bolts, brackets, and fittings from 304 parts, since attached steel drags the stainless grade down.
Clear heavy dirt and buildup. Knock off grease, scale, and debris from tanks and equipment, so more of the weight grades as clean stainless.
What affects your 304 Stainless Steel value
Nickel content
Grade mixing
Size and prep
Nickel market
304 Stainless Steel Recycling FAQs
What is 304 stainless steel?
304 stainless steel is the most common stainless grade, made of roughly 18 percent chromium and 8 percent nickel, which is why it’s called 18/8. That chrome and nickel give it strong corrosion resistance. In scrap it’s a valuable stainless grade, priced by the pound rather than the ton like carbon steel.
It shows up in sinks, appliances, kitchen equipment, tanks, and railings, so it’s the stainless most sellers run into.
Why does the size of 304 stainless affect its scrap price?
Size affects the rate because longer pieces need cutting before they can be processed. 304 stainless under about 4 feet is prepared and ready to melt, so it grades higher. Pieces over 4 feet still need sizing, so they grade a step lower to cover that extra handling.
Cutting oversized stainless down to under 4 feet before selling moves it into the higher prepared grade.
What's the difference between 304 and 316 stainless?
Both are chrome-nickel stainless, but 316 adds molybdenum and 304 doesn’t. That molybdenum gives 316 better resistance to salt and chemicals, so it grades higher. 304 is the everyday, general-purpose stainless, so it’s far more common in scrap and prices a step below 316.
They look identical, so 316 mixed into a 304 load gets paid at the 304 rate, which is why it pays to sort them.
How can I tell if something is 304 stainless?
04 is usually non-magnetic, so a magnet won’t stick, which separates it from magnetic carbon steel and 400-series stainless. But a magnet can’t tell 304 from 316, since both are non-magnetic. Cold-worked 304, like a formed sink, can also turn slightly magnetic, so a magnet is a starting point, not a final answer.
For grade-level certainty between 304 and 316, the metal has to be tested, which we do on intake.
Are 303, 304, and 321 stainless the same grade for scrap?
They’re closely related austenitic stainless grades and often grade together in scrap. 303 is a free-machining version, 304 is the general-purpose standard, and 321 is stabilized for high heat. Their scrap value sits close, so yards commonly price 303, 304, and 321 as one stainless class.
You don’t have to separate those three from each other, but keep them clear of higher grades like 316 and lower ones like 400 series.
Ready to sell your 304 Stainless Steel?
Turn your 304 into by-the-pound money, not carbon-steel scrap. We pick up on your schedule, test and grade it on intake, and weigh in the open so the nickel gets paid. Request a free pickup quote, and we'll tell you what your 304 is worth first.
Other Stainless Steel material & prices we pay
304 is one of several stainless grades that look alike but pay apart, next to 309 and 316. A magnet won't tell them apart. See the other stainless grades we buy so yours gets tested and paid right.
Prices vary with the commodity market, grade, quantity and your location, and may change daily. Contact us for current commercial and bulk pricing.
Industries that sell their scrap to us
Our scrap metal services
From scheduled commercial pickups to on-site containers for high-volume accounts. Individual drop-offs are always welcome.
General Public

Scrap Management

Demilitarization

Demolition Scrap

Bins & Containers

Certified Destruction


