Opens in a new tab

P&T Metals is a family-owned business located in Southern California, servicing businesses and industries for 58+ years.

Steel recycling · Los Angeles Area

We buy Appliances

Old appliances are mostly steel, so they grade as ferrous, but the motors and copper inside are worth pulling out. We buy them from haulers, contractors, and the public across Southern California, with pickups for volume and drop-off at our South El Monte facility. Priced fairly on the steel-and-copper mix.

P&T Scale House · Payout Ticket

Current

Grade: Appliances

$35.00/ton

Certified scalesFast payout
Updated November 12, 2026
This is an estimate. Prices move with the market. Contact us to confirm.
  • 58years in business
  • 10public scales
  • Direct millsupplier
  • LicensedCA weighmaster
  • Same-daycash payouts

How to prep your Appliances

  • Pull the motors and compressors. Remove electric motors and compressors from washers, dryers, and units, since the copper inside grades well above appliance steel.
  • Set refrigerators and AC units aside. Keep any unit with refrigerant separate and contact us first, since refrigerant has to be recovered by a certified tech, never vented.
  • Cut out the copper and aluminum. Pull copper wiring, harnesses, and aluminum coils where they come off easily, since those grade on their own higher rates.
  • Strip off the easy non-metal. Remove plastic lids, glass shelves, and cords you can pull, since that non-metal adds weight that doesn't pay.
  • Separate stainless panels. Set aside any stainless steel tops or drums, since stainless grades above the plain steel body.
  • Flatten or stack for transport. Group appliances together and off the ground so they stay clean and easy to load and weigh.

What affects your Appliance value

Metal mix

Appliances are mostly steel, so a whole unit grades as lower ferrous. What metals it holds sets the base rate.
Learn more

Non-ferrous parts

Motors, compressors, and copper wiring inside carry real value. Pulled out, that copper and aluminum grade well above the steel body.
Learn more

Non-metal weight

Plastic, glass, insulation, and rubber add weight that doesn't pay. The more non-metal on a unit, the lower it grades.
Learn more

Ferrous market

The steel body sells by the ton on the ferrous market. Where ferrous demand sits sets where the base rate lands.
Learn more

Appliance Recycling FAQs

  • Are old appliances worth money as scrap?

    Yes, though most large appliances grade as lower-value ferrous scrap, since they’re mostly steel with plastic and insulation mixed in. They’re priced by weight, so a load adds up, but a single appliance won’t pay much on steel alone. Units with copper or aluminum inside, like motors and coils, are worth more.

    Washers, dryers, stoves, dishwashers, and dryers all count, and shops and haulers often bring them in by the load.

  • Why do appliances grade lower than clean steel?

    Appliances grade lower because they’re not clean steel. Plastic housings, insulation, glass, rubber, and wiring are mixed into the steel body, and that non-metal weight isn’t recoverable. So a whole appliance grades below prepared steel, even though the steel shell itself has value once it’s processed.

    Stripping out the copper, aluminum, and clean steel before selling can move more of an appliance into higher grades.

  • Do appliances with motors or copper pay more?

    Yes. Appliances with electric motors, compressors, or copper and aluminum coils hold more valuable metal than a plain steel shell. Pulling those parts out lets the copper and aluminum grade on their own higher scales, while the remaining steel body grades as ferrous. Whole units are graded on their average mix.

    A washer motor or an AC compressor is worth separating, since that copper-bearing part grades well above the appliance steel around it.

  • Do you take refrigerators and air conditioners?

    Refrigerators and air conditioners contain refrigerant, which by law has to be recovered by a certified technician before scrapping, never vented. Units with the refrigerant already professionally removed and tagged are far simpler to handle. For fridges and AC units, contact us first so we can confirm what’s needed before you bring one in.

    The compressor and coils hold valuable copper and aluminum, but the refrigerant has to be dealt with properly first.

  • How should I prepare appliances before selling them?

    Pull off anything that isn’t metal where it’s easy, like plastic lids, glass shelves, and cords you can remove. If you can, separate the motor, compressor, or copper coils to sell those at their own rates. Otherwise, appliances can come in whole and get graded on their steel-and-parts mix.

    You don’t have to strip an appliance down, but the more non-metal you remove, the closer the steel grades to a clean rate.

Ready to sell your Appliances?

Turn those old appliances into cash instead of hauling them off. Bring them to our South El Monte facility, or we'll pick up a load on your schedule. We pull the copper and motors, weigh in the open, and pay on the mix. Request a quote or drop off today.

Other Steel material & prices we pay

Appliances are one steel item among several, next to structural steel, water heaters, and mixed ferrous. Each is graded its own way. See the other steel we buy so every piece sells at its real rate.

#1 Steel
$150.00/ton
$150.00/ton
Unprepared
$120.00/ton
Tin
$50.00/ton
E Grade Steel
$50.00/ton
Steel Chips/Turnings
$30.00/lb

Prices vary with the commodity market, grade, quantity and your location, and may change daily. Contact us for current commercial and bulk pricing.

Our scrap metal services

From scheduled commercial pickups to on-site containers for high-volume accounts. Individual drop-offs are always welcome.

General Public

Our South El Monte Location is open to the public! Sell all types of ferrous and non-ferrous metals and electronics for top dollar with our quick and friendly service and expert on-site assistance.

General Public Recycling Services

Scrap Management

We provide a comprehensive range of services designed to streamline operations, reduce costs, and maximize the value of your scrap metal. Our experienced team of experts will work with you to develop a customized solution that meets the specific needs of your operation.

Business Scrap Metal Management Services

Demilitarization

Safe and efficient demilitarization of your military equipment using state-of-the-art facilities and cutting-edge technology, ensuring the safety of the environment and the community. We also provide Demilitarization Certificates.

Demilitarization Recycling Services

Demolition Scrap

Are you a contractor looking for the best metal recycling service for your demolition projects? From container rental to transportation, advanced equipment and hazardous waste handling, we do it all. Hassle free.

Demolition Scrap Recycling Services

Bins & Containers

Comprehensive roll-off bin delivery and pick up for corporate, commercial, construction, and demolition projects. We offer on-site container placement and removal or exchange based on your specific needs and schedule.

Bins & Containers Recycling Service

Certified Destruction

Securely dispose of sensitive materials with our Certified Destruction services. We ensure your confidential documents and data are destroyed beyond recovery, keeping your business secure and compliant with regulations.

Certified Destruction and Electronics Recycling Services
See all services